05/20 UL2161 NO CORD TECH 2000 TRANSFORMER

Product Description
Item Number: GEN35K20
GEN35K20
POWER REQUIREMENTS
Voltage : 120 VAC, 50/60 Hz
Current : 0.50 A max (depends on load)
Power : 60 W max (depends on load)
INPUT CONNECTIONS
Two AWG 18 leads, 8 inches long, or power cord, 8 ft long, black or white.
CONTROL (OPTIONAL)
Red (+) and brown (-) wires can be connected to an electronic controller to modulate neon brightness or to gate the unit on and off.
Maximum "on" voltage : 1.20 V Minimum "off" voltage : 2.50 V
Control current : 1.6 mA (5 V control voltage) Absolute max. control voltage : 15 V
OUTPUT CHARACTERISTICS
Output is isolated from input for maximum flexibility of application. Shorted output supplies the rated current. Open circuit or excessive load will cause the unit to shut down, but special circuit will attempt
to automatically restart power up to three times to avoid nuisance trips.
Voltage : 5KV AC max. (actual voltage depends on load and will be equal to or lower than this value.)
Current : 20 mA
OUTPUT CONNECTIONS
GTO-5 leads, 12 inches long.
DIMENSIONS
3.62 x 1.40 x 0.70 (max) inches
MOUNTING
Unit is mounted with two 8-32 x 3/4 inch nylon screws and nuts (provided).